My kitchen table and chairs were a thing of the past. I purchased them long ago and remember thinking they were fine for the time being. I certainly didn’t realize I’d still have the same table and chairs 20 years later. Durable, yes! Lovely? Not so much and never were.
To be fair, both were functionally adequate. The main features I didn’t like were the color, shape, style and finish. Those are pretty tough features to overcome…essentially everything. But, why not give it a try? It really couldn’t get much worse.
We brainstormed an approach knowing that the goal was to reduce the cringe factor as I entered my kitchen. We broke it down and made a plan to tackle the elements that we could influence starting with the easiest – painting the chairs and the table legs.
Below is how we got it done.
Step 1. We lightly sanded all the surfaces of the chairs and legs with 150 grit sandpaper. Then used tacky cloth to remove all sanding dust before priming.
Step 2. I used a quality latex primer that I had on hand from another painting project. I somehow deleted the photos of this so use your imagination – white flat finish chairs and legs drying in my basement. The chairs already looked better with just the primer.
Step 3. Next I applied two coats of Benjamin Moore (Aura) “Split Pea” (2146-30) semi-gloss paint to the chairs. Heidi had some left over Pratt and Lambert “Field Gray”, matte finish paint for the table legs. I didn’t need much so I decided to use that.
I’m feeling pretty good about the chairs. We’ll let you know how the table goes! Stay tuned!
What can go wrong? Catching the running drips was a constant challenge. I did the best I could and decided to be ok with a few minor drips here and there. I knew I could touch up sand, prime, and spot paint if the drips really bothered me.